Hp solutions center software download. Canon powershot a10 software download. 27sf512 willem programmer software. Connectify 2016 download crack.

Sikafloor-263 SL is a two part epoxy self-smoothing and broadcast system for concrete and cement screeds in areas of normal to medium heavy traffic. Sikafloor-263SL is a two part, multi-purpose binder which is based on an epoxy resin.

It provides an economic means of providing a easily applied and economic and floor with good chemical and mechanical resistance with a gloss finish. Best Uses Sikafloor-263SL is used as self-smoothing and broadcast systems for concrete and cement screeds.

It is recommended for use in areas of normal to medium heavy wear, such as storage, multi-storey car parks, maintenance workshops and garages, etc. It can also be used in the food and beverage industry. Application The concrete substrate must be sound and of sufficient compressive strength. The substrate must clean, dry and free of al contaminants such as dirt, oil, grease, coatings and surface treatments. The product must be mechanically stirred, after confirming the substrate moisture content, r.h. And dew point.

Application will be with a serrated trowel and spiked roller. Please see Product Data Sheet for more information. Surface and Environment Concrete substrates must be mechanically prepared, using abrasive blast cleaning or scarifying equipment, to remove cement laitance and achieve an open textured surface. All dust, weak concrete, loose and friable material must be completely removed from all surfaces. The substrate and uncured floor must be at least 3°C. Technical Details Components: Two Part Type: Multipurpose binder based on epoxy resin Finish: Stock Colours: RAL 1001, 6021, 7030, 7032, 7035, 7037, 7038, 7040, 7042, 9002 Under direct sun light there may be some discolouration and colour variation; this has no influence on the function and performance of the coating. Tintable: Yes, on request.

Please note, bespoke tints are non refundable / exchangable. VOC Content: 500.0g per Litre Volume Solids: 100% Suitable Substrates: For concrete and cement Application Method: Serrated Trowel Theoretical Coverage: Approx 0.3 - 0.5 Kg per m2 applied as a roller coating Approx 0.9 - 1.2 Kg per m2 per mm applied as a self-smoothing wearing course These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.

For detailed info, please refer to the System data sheet Sikafloor® Multidur ES-24 and Sikafloor® Multidur EB-24 Wet Film Thickness (WFT): Dry Film Thickness (DFT): Induction Time: - Pot Life: 25 minutes at 20°C Touch Dry: Overcoatable: Between 24 hours and 2 days at 20°C Fully Cured: Cleaner / Thinner: Clean all tools and application equipment with immediately after use. Shelf Life: 24 months Packaging: Available in 20 Kg. The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application.

Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability. Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our.